unisonic technologies co., ltd mbr10200c preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd qw-r601-185.a schottky barrier rectifier ? features * 10 amps total (20 amps per diode leg) * guard ring for transient protection * low forward voltage drop * high surge capability * low power loss/high efficiency ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 mbr10200cl-ta3-t mbr10200cg-ta3-t to-220 a k a tube mbr10200cl-tf3-t MBR10200CG-TF3-T to-220f a k a tube note: pin assignment: a: anode k: cathode ? marking information package marking to-220/to-220f
mbr10200c preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-185.a ? absolute maximum ratings (t a =25c, unless otherwise specified) parameter symbol ratings unit maximum repetitive peak reverse voltage v rrm 200 v maximum non-repetitive peak reverse voltage v rm 200 v maximum dc blocking voltage v r 200 v average forward rectified output current per leg i o 5 a total 10 a non-repetitive peak forward surge current 8.3ms single half-sine-wave i fsm 150 a junction capacitance (note 4) c j 300 pf operating temperature t j -65 ~ +150 c storage temperature t stg -65 ~ +150 c ? thermal data parameter symbol ratings unit junction to ambient ja 60 /w junction to case to-220 jc 2 /w to-220f 4 /w ? electrical characteristics parameter symbol test conditions min typ max unit instantaneous forward voltage drop (note 3) v f i f =5a, t c =25c 0.90 v i f =5a, t c =125c 0.85 v i f =10a, t c =25c 1 v i f =10a, t c =125c 0.95 v instantaneous reverse current (note 3) i r rated dc voltage, t c =25c 500 a rated dc voltage, t c =125c 20 ma notes: 1. absolute maximum ratings are those valu es beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. 2.0 s pulse width, f = 1.0khz. 3. pulse test: pulse width=300s, duty cycle 2.0%. 4. applied v r = 4.0v and f = 1.0mhz.
mbr10200c preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-185.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
